Hock Tools overgenomen door Lee Valley Tools.

jaap

Moderator
9 mrt 2008
5.059
1.691
Terkaple
www.woodworking.nl
Al jaren sta ik bij Ron Hock op de mailinglist en hij stuurde net onderstaand bericht. De schaafbeitels etc die hij verkoopt worden in Frankrijk gemaakt.

jaap

---------------------------------------------------------------------------
Hi jaap,

It’s about time for me to re-read Zen and the Art of Motorcycle Maintenance. I rarely read a book more than once, but I’ve read Robert Persig’s profound treatise on the search for the meaning of quality four times, taking something new from it each time. One significant takeaway for me is the elusive nature of the concept of quality. What imbues one thing with higher quality than another? We often know the answer but cannot articulate it. A frustrating intellectual exercise, to be sure. But we know it when we see it, right?

I’ve been making and selling blades for hand planes for over forty years. I fell into this high-quality industry quite by accident. That propitious stumble in 1982 suited me; my experiences, abilities, and interests were well served by the straightforward nature of the manufacturing and the eager appreciation of the customers – you. And I’ve been continually dazzled by you for all these years. Our customers are decent, intelligent, high-integrity people. I don’t know how to thank you for your steadfast support over all these years.

Linda and I struggled through the start-up learning curve, and the market for hand tools grew, pulling us along to our modicum of success and sense of accomplishment. It would never have happened without Linda, Larry Kellogg in the shop, Julie Burns and Mark Taylor in the shipping department, and the enthusiasm of customers like you.

If this sounds like a swan song, it is: Lee Valley Tools is acquiring Hock Tools.

Rob Lee has been my friend for many years. And I admire his work and that of the engineers at Veritas. He’s promised to take care of my family name that’s engraved on each product and carry the Hock Tools legacy into the future with the same products, specs, suppliers, etc. Rob wants the transition to be seamless for you, the customer, so we’ll do our best to help him get up and running with our product line. There will undoubtedly be some wrinkles. We ask for your patience while we iron them out.

We hope to finalize the transition by the first of March, but that’s a flexible deadline. And we won’t just disappear – come say hi at Handworks. We’ll proudly be in the Lee Valley booth.

Linda and I thank you from the bottom of our hearts for your loyalty and enthusiasm all these years. We’re looking forward to new creative pursuits and unstructured time to engage in them. But, for now, I’ll find a copy of Zen and the Art -- and start a new chapter..​

S.gif
S.gif
S.gif



Ron Hock
Hock Tools​

1673984770824.png
 
  • Leuk
Waarderingen: avos, Rizz en EdP

Bert Vanderveen

Oud hout
1 sep 2015
2.769
738
Enschede, Twente
Aanvulling/correctie: het uitgangsmateriaal voor de schaafijzers komt inderdaad uit Frankrijk, maar het 'klaar maken' gebeurt bij Hock zelf. Dus temperen, slijpen, enz. [Aanvulling/correctie: ik meen dit gelezen te hebben in een mailing van Hock, maar uit Jaaps verslag kun je iets anders halen, nl dat de productie van bepaalde artikelen in zijn geheel uit Frankrijk komt. Wie het weet mag het zeggen. Einde aanvulling.]
Lee Valley is volgens mij de ideale voortzetter van de Hock-traditie. Ook een familiebedrijf, goed voor het personeel, reputatie van jewelste. Good people.
 
Laatst bewerkt:

Wim Kluck

Oud hout
28 feb 2010
10.689
2.568
Gaanderen
Ja nu word de vraag wanneer kan je ze krijgen. De levertijden van Veritas zijn kwalitatief uitermate teleurstellend. Ik heb een klein jaar moeten wachten op een schaafje. Ik heb gewacht en de order niet geannuleerd al heb ik daar diverse keren aan gedacht. Het alternatief was Lee Nielsen ook mooi maar hier zijn de levertijden misschien nog wel slechter. Voor het door mij gewenste model waren er geen alternatieven. De kwaliteit is top. Het ziet er mooi uit. Dus moet mijn verzameling maar even wachten.
 

jaap

Moderator
9 mrt 2008
5.059
1.691
Terkaple
www.woodworking.nl
Een dikke 10 jaar geleden ben ik in Fort Bragg geweest. Wij woonden toen in Bangkok en mijn Friese buurman woonde destijds in San Francisco. Mijn vrouw moest voor haar werk naar Nederland en ik ging via Seoel naar Los Angeles en daarna San Francisco Heb er toen een verslagje van gemaakt.
Ron Hock is een zeer toegankelijk een aardig mens, woonde in een soort bungalow met een garage. Daar lag de voorraad en werd het verstuurd. In een klein schuurtje achter op het erf werden de prototypes en aparte dingen gemaakt door Larry. Ron begon met messen maar met de komst van James Krenov en de School of the Redwood, kwam er een vraag of hij een schaafbeitel wilde maken. Ron is nu nog bestuurslid van de Krenov foundation.
Het verslag staat in deze link, heb het met een grote smile nog een keer gelezen.... Op houtbewerkers reis

jaap
 

Wim Kluck

Oud hout
28 feb 2010
10.689
2.568
Gaanderen
Jaap ik heb jouw oude topic weer met veel plezier gelezen, toch wel een klein beetje jaloers dat zo'n mooie reis er niet inzit.
Toen ik dit stukje lang geleden las heb ik het boek over schaven van Hock gekocht. Een schaaf gemaakt maar helemaal af is ie nooit gekomen. Zal eens kijken of ie nog ergens tussen de houtvoorraad ligt.
 

Deze plek is voor toekomstige tekst. Door nu alvast deze kolom te activeren blijft de kolommen structuur ongewijzigd en de lezerservaring hetzelfde als er hier content geplaatst gaat worden.

Hier kan straks ook info geplaatst worden.